查看特别推荐 >>
12539
Tris-Glycine Transfer Buffer (10X)
缓冲液与染料
缓冲剂

Tris-Glycine Transfer Buffer (10X) #12539

Citations (0)

Product Usage Information

To make 1L of 1X transfer buffer: Mix 100 ml of 10X transfer buffer, 200 ml of methanol, and 700 ml of ddH2O and store at 4ºC for up to one week. This product supplies enough 10X material to make 10 liters of 1X solution. Generally, 20% methanol is recommended, however it may be beneficial to decrease methanol concentration to 5-10% for increased transfer efficiency of large, low abundancy proteins. CST recommends electrotransferring to 0.2 μm pore size nitrocellulose membranes at 70 volts for 2 hours.

Storage

Store 10X buffer at room temperature. At 10X, this buffer is stable for 24 months. Store at 4°C and use within 1 week once it has been diluted to 1X and methanol is added.

Product Description

Tris-Glycine Transfer Buffer (10X) is used as a transfer buffer during western blotting. Product is shipped and stored at room temperature.
1X Formulation: 25 mM Tris, 192 mM Glycine, 20% (v/v) methanol, pH ~8.3.
Note: Methanol is not supplied but is required.

Background

Tris-Glycine Transfer Buffer (10X) is a commonly used western blot buffer for the electrotransfer of proteins from SDS-PAGE gels to nitrocellulose or PVDF membranes. The formulation is based on the widely accepted Towbin transfer buffer (1) and is for use in tank (wet) transfer systems, the recommended system used by Cell Signaling Technology (CST) scientists.

Limited Uses

Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.

Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.

For Research Use Only. Not for Use in Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit our Trademark Information page.
To Purchase # 12539S
Cat. # Size Price Inventory
12539S
1 liter